Silicone Rubber Key Design Guide

·  Overview of Silicone Rubber Key

  1. Basic Structure of Rubber Key.
  2. Force-Travel Curve of Silicone Rubber Key.
Silicone Rubber Key Design Guide-WeGlow

3. Characteristics, Performance, and Applications of Different Structures of Silicone Rubber Key.

Silicone Rubber Key Design Guide-WeGlow
Silicone Rubber Key Design Guide-WeGlow

·  Structural Design of Silicone Rubber Key

  1. Functional Requirements of Rubber Key Design
    • Achieving designated function when pressed.
    • Automatic and complete reset after removal of external force.
    • Good tactile feel during pressing and resetting, without obstruction or rough sensation; effective when pressing the edge of the key.
  2. Key Points in Rubber Key Design
Silicone Rubber Key Design Guide-WeGlow

3. Technical Requirements

  • Actuation force: 130±35 grams.
  • Tactile feedback requirements.
  • Expected lifespan: 1 x 10^5 cycles minimum.
  • Silicone hardness: 50~60°.
  • Contact resistance less than 200 ohms.
  • Travel = 1.0 (or 1.5) mm.
  • Thickness of carbon pill: 1.0mm.
  • Contact bounce less than 12 milliseconds.
  • Pad color: Optional.

4. Integration of Rubber Key with Plastic Housing

  • General design rules.
Silicone Rubber Key Design Guide-WeGlow

·  Gap Value Recommendation Table

  • Influence of silicone rubber key shape, size, and travel distance on design gap values. Simple shapes, smaller sizes, and shorter travel distances generally require smaller gap values, and vice versa. Gap values for integration of Rubber Key with plastic housing (unilateral gaps):
  • a. Rubber Key with a travel distance of 1.0mm.
Silicone Rubber Key Design Guide-WeGlow
  • b. Rubber Key with a travel distance of 1.5mm.
Silicone Rubber Key Design Guide-WeGlow
  • c. Rubber Key with a travel distance of 2.0mm.
Silicone Rubber Key Design Guide-WeGlow
  • General dimensional tolerances and precision of the elasticity range.

·  Silicone Keyboard with PCB & Membrane Switch Assembly

  1. Assembly Methods of Rubber Key
Silicone Rubber Key Design Guide-WeGlow
  1. Assembly Methods of Rubber + Key Top (Button)
    • Assembly methods for multiple Rubber pieces.
    • Assembly method for a single Rubber piece.
Silicone Rubber Key Design Guide-WeGlow

·  Selection of Rubber Key

  • Considerations when selecting Rubber Key: Travel, rebound force, and preload (height of the compressed part of Rubber should be greater than the distance between the key and PCB to prevent shaking in the normal state, typically 0.2mm). Examples of typical selections.
Silicone Rubber Key Design Guide-WeGlow

·  Auxiliary Design Parts of Rubber Key

  1. General design specifications for conductive particles.
Silicone Rubber Key Design Guide-WeGlow
  1. General concepts of silk screen printing.
Silicone Rubber Key Design Guide-WeGlow

·  Performance and Testing of Rubber Key

  1. Mechanical and electrical properties of silicone.
Silicone Rubber Key Design Guide-WeGlow
  1. Life test of silicone rubber keys.
Silicone Rubber Key Design Guide-WeGlow

·  DA Design Review Content

  1. Check if the structure’s corresponding performance and usage match the design requirements.
  2. Specific structural requirements:
    • Distance from the positioning hole to the edge of the sloping wall not less than 1.0mm.
    • Positioning hole size not less than 1mm.
    • Key surface radius not less than 0.25mm.
  3. Requirements for the gap between plastic housing and Rubber Key.
  4. Assembly method with PCB and preload of Rubber (generally 0.2mm).
  5. Silk screen test reference for Rubber Key surface: QAD-TEI-011.
  6. Life test of Rubber Key, meeting the corresponding lifespan requirements​​.

You can read “What are Silicone Rubber Keypads?” for more information about silicone membrane switches.

Visit our homepage for more product information and solutions.

KONTAKTIEREN SIE UNS

Egal was Sie haben, kontaktieren Sie uns jederzeit. Unsere Produktexperten werden sich innerhalb von 24 Stunden mit Ihnen in Verbindung setzen.